Address

Aegis Rubber Engineering

Unit 14-15 Bolney Grange Business Park

Stairbridge Lane

Haywards Heath

West Sussex RH17 5PB

Telephone

+44 (0) 1444 871116

+44 (0) 1444 244720

Email

info@aegisrubberengineering.co.uk

Phone: +44 (0) 1444 871116

Email: info@aegisrubberengineering.co.uk

Railways

Home  >  Sectors

Railways

Products for this market include parts for carriage coupling, and components for primary and secondary suspension systems.

Aegis Rubber Engineering Ltd has been designing and manufacturing a range of products for this industry for the last twenty years. Our components include:

We offer a refurbishment service for rail components, and are experienced in manufacturing components for the heritage railway sector including the world famous Orient Express and the Bluebell Railway.

For further information please contact us. 

Bonded Bushes

The fully bonded bush consists of rubber bonded between two concentric steel sleeves. The bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.

Buffers

Both stud type mountings and rectangular bump stops are available.

Duplex Bushes

Duplex bushes are similar to standard bushes, but are reinforced with an intermediate tube. This bush configuration provides high radial load bearing whilst retaining low axial and torsional stiffness rates.

Inner Sleeve Bushes

Inner sleeve bushes consist of rubber bonded to the inner sleeve and are designed to accommodate small torsion, conical and axial movements and endure radial loads.

Link Arm Assemblies

We can provide complete link arm assemblies using either customer supplied metalwork or in-house fabricated components.

Sandwich Mounts

Sandwich mounts are used for a great many applications. They are designed to accommodate misalignment and provide vibration and shock isolation for shear and compressive axial loads.

Semi Bonded Bushes

A semi-bonded bush consists of rubber sandwiched between two concentric steel sleeves. The rubber is bonded to the inner sleeve and interference fitted to the outer sleeve. The semi-bonded bush is designed to accommodate small torsion, conical and axial movements and endure radial loads.

Specials

We offer a variety of non-standard bushes, designed to customer specification. If required we can use customer metal work to produce the finished part.

Spherical Bearings

These bushes consist of a contoured inner and outer metal forming a ball-joint, articulated by a thin annulus of rubber. They are designed to accommodate high radial and axial loads and allow conical and torsional displacement and misalignments.

Spring-Eye Bushes

The spring-eye bush consists of rubber bonded to an inner tube and force-fitted into an outer sleeve. The spring-eye bush is similar to the semi-bonded bush series, although the outer metals are turned over to increase radial and axial load bearing capability.

Phone: +44 (0) 1444 871116

Email: info@aegisrubberengineering.co.uk



This website may use cookies to provide an improved experience. You can refuse these cookies by changing your browser settings.
To remove this message, click here to accept cookies.